Tired of hangar rash and bumping the wings and tail of your glider into things?

Easily move your glider in and out of your hangar without having to find all your buddies at the airport to help.

These are brand new dollies made from 3/16" plate steel with 2.5" metal wheel casters.  Load tested to 1200 pounds for even the heaviest of sailplanes.

For more information or to Buy one now - Click here.

When the dolly is rolled up to a tire, the casters swivel away from the tire allowing the dolly to tip forward so that the front edge sits on the floor preventing the dolly from rolling away.  Once the tire is on the dolly it will not tip.

Here are the dimensions in the two pictures below.
Check the distance from the floor to the bottom of your fuselage to make sure it is at least 3.5".

Since I didn't have a very heavy sailplane readily available, this is the next best thing.
A 4200 pound Studebaker with most of the weight on the front wheels.

Notice there is almost no noticeable bending with the load.
Once the load is removed it will flex back to perfectly flat.
The wheels do not bend and still swivel and roll normally with this load.

For more information or to Buy one now - Click here.